Tailoring a Dress to Single Protein Molecules: Proteins Can Do It Themselves through Localized Photo-Polymerization and Molecular Imprinting

Molecularly imprinted polymer nanoparticles (MIP NPs) are antibody-like recognition materials prepared by a template-assisted synthesis. MIP NPs able to target biomolecules, like proteins, are under the spotlight for their great potential in medicine, but efficiently imprinting biological templates is still very challenging. Here we propose generating a molecular imprint in single NPs, by photochemically initiating the polymerization from individual protein templates. In this way, each protein molecule tailors itself its own “polymeric dress”. For this, the template protein is covalently coupled with a photoinitiator, Eosin Y. Irradiated with light at 533 nm, the Eosin moiety acts as an antenna and transfers energy to a co-initiator (an amine), which generates a radical and initiates polymerization. As a result, a polymer network is forming only around the very template molecule, producing cross-linked NPs of 50 nm, with single binding sites showing high affinity (K_D 10⁻⁹ m ) for their biological target, and selectivity over other proteins.     

Preparing molecularly imprinted nanoparticles of saponins via cooperative imprinting strategy

Saponin is an important class of natural products with various pharmacological activities. The selective separation of saponins is an essential step before further analysis. Molecular imprinting has been an effective strategy for preparing antibody mimics. However, a facile and efficient imprinting strategy for saponins is still lacking owing to their amphiphilic nature. Herein, we have prepared the saponins imprinted nanoparticles via cooperative imprinting strategy. This new strategy relies on the combination of various non‐covalent interactions (hydrophobic and hydrogen bonding) and covalent boronate affinity interactions. The obtained imprinted nanoparticles could rebind specific saponins from complex matrices with good selectivity, superb tolerance to interference, and fast binding equilibrium. This method was verified to be versatile and facile. Thus, this strategy could greatly facilitate the preparation of imprinted nanoparticles for the specific recognition of saponins.     

Preparation of magnetic molecularly imprinted polymer nanoparticles by surface imprinting by a sol–gel process for the selective and rapid removal of di‐(2‐ethylhexyl) phthalate from aqueous solution

Magnetic molecularly imprinted polymer nanoparticles for di‐(2‐ethylhexyl) phthalate were synthesized by surface imprinting technology with a sol–gel process and used for the selective and rapid adsorption and removal of di‐(2‐ethylhexyl) phthalate from aqueous solution. The prepared magnetic molecularly imprinted polymer nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and vibrating sample magnetometry. The adsorption of di‐(2‐ethylhexyl) phthalate onto the magnetic molecularly imprinted polymer was spontaneous and endothermic. The adsorption equilibrium was achieved within 1 h, the maximum adsorption capacity was 30.7 mg/g, and the adsorption process could be well described by Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer displayed a good adsorption selectivity for di‐(2‐ethylhexyl) phthalate with respect to dibutyl phthalate and di‐n‐octyl phthalate. The reusability of magnetic molecularly imprinted polymer was demonstrated for at least eight repeated cycles without significant loss in adsorption capacity. The adsorption efficiencies of the magnetic molecularly imprinted polymer toward di‐(2‐ethylhexyl) phthalate in real water samples were in the range of 98–100%. These results indicated that the prepared adsorbent could be used as an efficient and cost‐effective material for the removal of di‐(2‐ethylhexyl) phthalate from environmental water samples.     

Radical-Bridged Heterometallic Single-Molecule Magnets Incorporating Four Lanthanoceniums

The syntheses and magnetic properties of organometallic heterometallic compounds [K(THF)₆]{Co^I[(μ₃-HAN)RE₂Cp*₄]₂} ( 1-RE ) and [K(Crypt)]₂{Co^I[(μ₃-HAN)RE₂Cp*₄]₂} ( 2-RE ) containing hexaazatrinaphthylene radicals (HAN⋅³⁻) and four rare earth (RE) ions are reported. 1-RE shows isolable species with ligand-based mixed valency as revealed by cyclic voltammetry (CV) thus leading to the isolation of 2-RE via one-electron chemical reduction. Strong electronic communication in mixed-valency supports stronger overall ferromagnetic behaviors in 2-RE than 1-RE containing Gd and Dy ions. Ac magnetic susceptibility data reveal 1-Dy and 2-Dy both exhibit slow magnetic relaxation. Importantly, larger coercive field was observed in the hysteresis of 2-Dy at 2.0 K, indicating the enhanced SMM behavior compared with 1-Dy . Ligand-based mixed-valency strategy has been used for the first time to improve the magnetic coupling in lanthanide (Ln) SMMs, thus opening up new ways to construct strongly coupled Ln-SMMs.     

Construction of a QCM sensor for detecting diethylstilbestrol in water based on the computational design of molecularly imprinted polymers

Combining molecular imprinting technology and quartz crystal microbalance (QCM), the diethylstilbestrol-molecularly imprinted polymers (DES-MIPs) were designed. The LC-ωPBE/6-31G(d,p) method was chosen to predict the properties of DES-MIPs in this study. The calculated results showed that the complex formed from DES and methacrylic acid with molar ratio of 1:5 and ethylene dimethacrylate as cross-linking agent had the largest amount of hydrogen bonds, the lowest binding energy, and the optimal stability property. With the guidance of calculations, the DES-MIPs were used to prepare QCM electrode by embedding method to construct the DES-MIPs-QCM sensor. The experimental results displayed that the sensor had a high binding affinity for DES when the DES-MIPs was 15 mg and the coating volume was 10 µL. The minimum detection limit of the sensor for DES was 2.63 ng/mL in the range of 50 to 350 ng/mL. The DES-MIPs-QCM sensor exhibited high recognition capacity for DES compared to its structural analogs. The sensor had been successfully used for the determination of DES in the actual water samples.     

High-Spin and Reactive Fe13 Cluster with Exposed Metal Sites

Atomically defined large metal clusters have applications in new reaction development and preparation of materials with tailored properties. Expanding the synthetic toolbox for reactive high nuclearity metal complexes, we report a new class of Fe clusters, Tp*₄W₄Fe₁₃S₁₂ , displaying a Fe₁₃ core with M−M bonds that has precedent only in main group and late metal chemistry. M₁₃ clusters with closed shell electron configurations can show significant stability and have been classified as superatoms. In contrast, Tp*₄W₄Fe₁₃S₁₂ displays a large spin ground state of S=13. This compound performs small molecule activations involving the transfer of up to 12 electrons resulting in significant cluster rearrangements.     

新型样品前处理材料在环境污染物分析检测中的研究进展

针对复杂样品的分析和痕量目标物的检测,样品前处理是必不可少的,高效的样品前处理技术不仅可以去除或减小样品基质干扰而且能够实现分析物的富集,提高分析检测的准确性和灵敏度。近年来,固相萃取、磁分散固相萃取、枪头固相萃取、搅拌棒萃取、固相微萃取等高效的样品前处理技术已在环境污染物分析检测中获得广泛关注,萃取效率主要取决于萃取材料,所以新型的高效萃取材料一直是样品前处理研究领域的重要发展方向。该文总结和讨论了近年来新型样品前处理材料在环境污染物分析检测中的研究进展,主要聚焦在石墨烯、氧化石墨烯、碳纳米管、无机气凝胶、有机气凝胶、三嗪基功能材料、三嗪基聚合物、分子印迹聚合物、共价有机框架材料、金属有机框架材料以及它们的功能化萃取材料等。这些材料已经被应用于环境样品中不同类别污染物的萃取富集,如重金属离子、多环芳烃、塑化剂、烷烃、苯酚、氯酚、氯苯、多溴联苯醚、全氟磺酸、全氟羧酸、雌激素、药物残留、农药残留等。这些样品前处理材料具有高的表面积、大量的吸附位点,并涉及多种萃取机理如π-π、静电、疏水、亲水、氢键、卤键等相互作用。基于这些萃取材料的多种样品前处理技术与各类检测方法如色谱、质谱、原子吸收光谱、荧光光谱、离子迁移谱等相结合,已广泛应用于环境污染物的高灵敏分析检测。最后,该文总结了样品前处理发展中存在的问题,并展望了其未来在环境分析中的发展趋势。     

Imprinted ZnO nanostructure-based electrochemical sensing of calcitonin: A clinical marker for medullary thyroid carcinoma

The present work describes an exciting method for the selective and sensitive determination of calcitonin in human blood serum samples. Adopting the surface molecular imprinting technique, a calcitonin-imprinted polymer was prepared on the surface of the zinc oxide nanostructure. Firstly, a biocompatible tyrosine derivative as a monomer was grafted onto the surface of zinc oxide nanostructure followed by their polymerization on vinyl functionalized electrode surface by activator regenerated by electron transfer–atom transfer radical polymerization (ARGET–ATRP) technique. Such sensor can predict the small change in the concentration of calcitonin in the human body and it may also consider to be as cost-effective, renewable, disposable, and reliable for clinical studies having no such cross-reactivity and matrix effect from real samples. The morphologies and properties of the proposed sensor were characterized by scanning electron microscopy, cyclic voltammetry, difference pulse voltammetry and chronocoulometry. The linear working range was found to be 9.99 ng L⁻¹ to 7.919 mg L⁻¹ and the detection limit as low as 3.09 ± 0.01 ng L⁻¹ (standard deviation for three replicate measurements) (S/N = 3).     

Water‐Soluble Molecularly Imprinted Nanoparticles (MINPs) with Tailored,Functionalized, Modifiable Binding Pockets

Construction of receptors with binding sites of specific size, shape, and functional groups is important to both chemistry and biology. Covalent imprinting of a photocleavable template within surface–core doubly cross‐linked micelles yielded carboxylic acid‐containing hydrophobic pockets within the water‐soluble molecularly imprinted nanoparticles. The functionalized binding pockets were characterized by their binding of amine‐ and acid‐functionalized guests under different pH values. The nanoparticles, on average, contained one binding site per particle and displayed highly selective binding among structural analogues. The binding sites could be modified further by covalent chemistry to modulate their binding properties.     

计算机辅助设计三聚氰胺分子印迹聚合物

借助密度泛函理论(DFT)长程校正方法,以三聚氰胺(MAM)为印迹分子,甲基丙烯酸(MAA)为功能单体,分别以二甲基丙烯酸乙二醇酯(EGDMA)、三羟甲基丙烷三甲基丙烯酸酯(TRIM)及二乙烯苯(DVB)为交联剂,以乙腈(ACN)、甲醇(MT)、乙醇(EA)、甲苯(TL)、四氢呋喃(THF)及二甲基亚砜(DMSO)为溶剂,模拟了MAM与MAA单体分子印迹聚合物(MIPs)自组装体系的构型,讨论了MAM与MAA的成键作用位点,及其稳定复合物的印迹反应比例及印迹作用机理,依据结合能(△E)优化了交联剂和溶剂,并借助分子中原子理论(AIM)揭示了MAM与MAA印迹作用的本质.计算结果表明,MAM印迹分子三嗪环上的N与胺基上H均通过氢键与MAA单体进行印迹聚合反应,且在印迹反应比例为1∶6,以TL为溶剂时形成的MAM-MAA有序复合物结合能最低,构型最稳定;与TRIM及EGDMA交联剂相比,DVB与MAM结合能最低,更适宜作为MAM-MAA印迹聚合物的交联剂.本研究为MAM-MIPs合成时印迹比例、交联剂及溶剂的选择提供了理论依据.